ChickenCoopPlanner.com

Walk-in chicken coop plans

A small shed you walk into, for 8 to 40 hens, with an optional attached run.

Free to designPDF plan · $19.99 one-time

30 hens (from 8)
840
Breed size
Climate
Roof
Roofing
Siding
Foundation
Human door wall
Window (on the wall opposite the door)
Attached run
Predator apron
Hardware cloth mesh
WoodNatural pine
AssemblyFully assembled

View

Switch layers off to see the frame inside.

One-time payment · No subscription

Get the build plan

$19.99

Designing is free. The PDF for this exact coop is a one-time $19.99.

  • Cut list and cutting diagrams
  • Every wall drawn with each screw
  • Step-by-step illustrated assembly
  • No account needed

What's in the walk-in coop plan

Every plan is a PDF made for the flock and the options you pick above. It is not one drawing scaled up: the coop and run are sized for your hens first, and then every part is worked out. A 12-hen walk-in coop with its attached run comes to 60 different parts, 177 pieces in all, 11 of them with an angled cut, and 23 assembly steps.

  • A space check: the coop floor, run and ventilation your flock needs against what the plan gives them.
  • A shopping list grouped by store aisle (lumber, sheet goods, hardware cloth, roofing, fasteners, hardware & finish), with every board length and an estimated cost.
  • A cut list with a label for every part, and board-by-board cutting diagrams that allow for the saw kerf.
  • 4×8 sheet layouts for the plywood, so you know which panel comes out of which sheet.
  • Every wall drawn flat with each screw marked and the direction to drive it.
  • The hardware cloth and predator apron layout, roll by roll.
  • Step-by-step assembly with an illustration for every step.
  • A finishing and predator-proofing checklist, and maintenance and winter tips.

Roosts and nest boxes are left to you: the PDF shows approximate examples and gives the roost length and nest box count your flock needs. See a sample plan before you decide.

How big should a walk-in chicken coop be?

Size follows the flock. A standard hen needs 4 sq ft of coop floor (2 for bantams, 5 for large breeds) and 10 sq ft of run (5 and 12). Where winters are cold the coop floor grows by 25%, because hens spend more time inside. The planner then picks the smallest coop on a 2 ft grid that meets the need and wastes the least lumber, and stretches the attached run until it gives the hens their run area.

The table shows what the planner draws for standard hens in a cold climate, the configurator's default. The largest single walk-in coop is 16 × 10 ft, so from 40 hens the plan is two coops of 20 hens each. Open any row for the full space check, the breed and climate tables and a preview.

HensCoop floor neededCoopAttached runMaterials (est.)
8 chickens40 sq ft8 × 8 ft10 × 8 ftabout $2,750
10 chickens50 sq ft8 × 8 ft14 × 8 ftabout $2,910
12 chickens60 sq ft8 × 8 ft16 × 8 ftabout $2,980
15 chickens75 sq ft10 × 8 ft20 × 8 ftabout $3,500
20 chickens100 sq ft10 × 10 ft20 × 10 ftabout $4,210
25 chickens125 sq ft16 × 8 ft32 × 8 ftabout $4,800
30 chickens150 sq ft16 × 10 ft30 × 10 ftabout $5,630
40 chickens200 sq ft2 × 10 × 10 ft2 × 20 × 10 ftabout $8,430

Bantams, large breeds and mild winters change the numbers: set them in the configurator above, or work them out first with the chicken coop size calculator.

Materials and cost

The materials for a walk-in coop with its run come to about $2,750 for 8 hens and about $5,630 for 30 hens (standard hens, cold winters); the two coops for 40 hens come to about $8,430. The starter plan, the 8-hen coop the configurator opens with, needs about $2,750 of materials. The estimates use rough US big-box prices.

For a 12-hen coop at about $2,980, this is what the options change:

  • Roofing: corrugated metal is the default. Asphalt shingles on OSB come to +$10, corrugated polycarbonate to +$110.
  • Siding: plywood with battens is the cheapest. T1-11 is +$60, board and batten +$700.
  • Roof shape: a lean-to roof is −$100 against a gable.
  • Foundation: concrete blocks instead of pressure-treated skids on gravel are +$70.
  • Mesh: 1/4 in hardware cloth instead of 1/2 in is +$200, and keeps mice and snakes out too.
  • Climate: a mild climate needs a smaller coop (−$190); severe cold adds insulation (+$840).
  • Run: leaving the attached run off is −$1,110.

Prices vary by store, region and season, so use them to compare designs, not as a quote. The configurator shows the cost by store aisle after every change, before you pay anything. The plan itself is $19.99, one time.

Skill level and tools

If you have built a deck, a garden shed or a raised bed, you can build this coop. It uses dimensional lumber, plywood sheets and screws: no joinery. Most cuts are straight crosscuts; the 11 angled cuts in a 12-hen plan each have their angle printed. The walls are framed lying on the floor and then stood up, and the drawings show every screw, so you never have to guess where one goes.

Tools you will need:

  • A circular saw or miter saw for the boards, and a circular saw with a straight edge for the plywood.
  • A drill/driver, with a bit to pre-drill screws near the board ends.
  • Tin snips for the hardware cloth.
  • A tape measure, a speed square, a level and a string line.
  • A shovel and a rake for the gravel pad and the predator apron, and a step ladder for the roof.

The screws are all in the shopping list: 3-1/2" structural screws, 2-1/2" exterior deck screws, 1" screws + 1-1/4" fender washers (hardware cloth), 1-1/4" screws for hinges, 1-1/4" screws for latches.

Walk-in chicken coop FAQ

How many chickens does a walk-in coop hold?

The planner sizes walk-in coops for 8 to 40 hens. The largest single coop it draws is 16 × 10 ft (160 sq ft of floor). A bigger flock, such as 40 standard hens in a cold climate, gets two coops of 20 hens each.

How much space does each hen need in a walk-in coop?

4 sq ft of coop floor per standard hen, 2 for bantams and 5 for large breeds, plus 25% where winters are cold. Each hen also gets 10 sq ft of run (5 for bantams, 12 for large breeds) and 10 inches of roost bar.

Can I build the walk-in coop without the run?

Yes. Set the run to none and the plan drops the run's posts, rails, roof and hardware cloth. For 12 hens that takes the estimated materials from about $2,980 to about $1,880. You can also build the run later from the chicken run plan.

Are roosts and nest boxes included?

They are left to your own taste, and the PDF shows approximate examples of both with the numbers your flock needs: 10 inches of roost bar per standard hen and one nest box per 4 hens, each about 12 inches square.

Do I need a building permit for a walk-in coop?

It depends where you live. Structures over about 108 sq ft (10 m²) may need a permit in parts of Canada, and many US areas exempt sheds up to 120 sq ft. Check your local rules before you build, and check the rules on keeping hens too.

Is there a free walk-in coop plan?

Yes, for a limited time. The starter plan, the 8-hen coop with its run that the configurator opens with, downloads free and in full. Change anything and the plan is made for you at the normal price of $19.99.